stuck on booting Android kikat
Hello All,
I am trying to boot andoid kitkat image. I started building android kitkat image using this link: http://www.gem5.org/Android_KitKat
When I run the img with --machine-type=RealView_PBX, I got " Aborted (core dumped) ".
I tried also running without using machine type option with the following command:
./build/ARM/gem5.opt configs/example/fs.py --kernel=/dist/m5/system/binaries/vmlinux --disk-image=/dist/m5/system/disks/android-kitkat_4.4.4_exact.img --cpu-type=atomic --frame-capture -n 1 --caches --l2cache --l1d_size=16kB --l1i_size=16kB --l2_assoc=16 --l2_size=2MB --mem-size=512MB --os-type=android-kitkat --mem-type=LPDDR2_S4_1066_x32
I got the following in the system console and the frame captured is black while
Global frequency set at 1000000000000 ticks per second
info: kernel located at: /dist/m5/system/binaries/vmlinux
Listening for system connection on port 5900
Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80008000
info: Loading DTB file: /dist/m5/system/binaries/vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb at address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: Not doing anything for miscreg ACTLR
warn: Not doing anything for write of miscreg ACTLR
warn: The clidr register always reports 0 caches.
warn: clidr LoUIS field of 0b001 to match current ARM implementations.
warn: The csselr register isn't implemented.
warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
warn: CP14 unimplemented crn[0], opc1[0], crm[7], opc2[0]
warn: Returning zero for read from miscreg pmcr
warn: Ignoring write to miscreg pmcntenclr
warn: Ignoring write to miscreg pmintenclr
warn: Ignoring write to miscreg pmovsr
warn: Ignoring write to miscreg pmcr
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: SCReg: Writing 0x8416740 to dcc0:site1:pos0:fn1:dev5
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
3211459798500: system.terminal: attach terminal 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: instruction 'mcr bpiall' unimplemented
When I make connection with telnet, I got the following:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
Connection closed by foreign host.
othman(a)othman-MacBookPro:~/gem5-stable$ telnet localhost 3456
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
binder: 944:944 transaction failed 29189, size 0-0
random: installd urandom read with 28 bits of entropy available
warning: `rild' uses 32-bit capabilities (legacy support in use)
shell(a)generic:/ $
I would really appreciate if you guide me to solve this issue.
Thanks,
Rabab
You are already in the shell and everything is working correctly. If you want to see the graphical interface, just connect to it using a vnc viewer.
I've been trying to build the image myself, but is seems like I built it incorrectly. Did you follow the instructions on the actual AOSP website, or just the commands from the gem5 website?
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.uk>
Sent: Thursday, July 14, 2016 4:23 PM
To: gem5-users(a)gem5.org; m5-users(a)m5sim.org
Subject: [gem5-users] stuck on booting Android kikat
Hello All,
I am trying to boot andoid kitkat image. I started building android kitkat image using this link: http://www.gem5.org/Android_KitKat
Android KitKat - gem5http://www.gem5.org/Android_KitKat
www.gem5.org
Building Android KitKat for gem5 Overview. The easiest way to build Android for gem5 is to base the system on a the emulated Goldfish device. The main difference ...
When I run the img with --machine-type=RealView_PBX, I got " Aborted (core dumped) ".
I tried also running without using machine type option with the following command:
./build/ARM/gem5.opt configs/example/fs.py --kernel=/dist/m5/system/binaries/vmlinux --disk-image=/dist/m5/system/disks/android-kitkat_4.4.4_exact.img --cpu-type=atomic --frame-capture -n 1 --caches --l2cache --l1d_size=16kB --l1i_size=16kB --l2_assoc=16 --l2_size=2MB --mem-size=512MB --os-type=android-kitkat --mem-type=LPDDR2_S4_1066_x32
I got the following in the system console and the frame captured is black while
Global frequency set at 1000000000000 ticks per second
info: kernel located at: /dist/m5/system/binaries/vmlinux
Listening for system connection on port 5900
Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80008000
info: Loading DTB file: /dist/m5/system/binaries/vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb at address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: Not doing anything for miscreg ACTLR
warn: Not doing anything for write of miscreg ACTLR
warn: The clidr register always reports 0 caches.
warn: clidr LoUIS field of 0b001 to match current ARM implementations.
warn: The csselr register isn't implemented.
warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
warn: CP14 unimplemented crn[0], opc1[0], crm[7], opc2[0]
warn: Returning zero for read from miscreg pmcr
warn: Ignoring write to miscreg pmcntenclr
warn: Ignoring write to miscreg pmintenclr
warn: Ignoring write to miscreg pmovsr
warn: Ignoring write to miscreg pmcr
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: SCReg: Writing 0x8416740 to dcc0:site1:pos0:fn1:dev5
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
3211459798500: system.terminal: attach terminal 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: instruction 'mcr bpiall' unimplemented
When I make connection with telnet, I got the following:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
Connection closed by foreign host.
othman(a)othman-MacBookPro:~/gem5-stable$ telnet localhost 3456
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
binder: 944:944 transaction failed 29189, size 0-0
random: installd urandom read with 28 bits of entropy available
warning: `rild' uses 32-bit capabilities (legacy support in use)
shell(a)generic:/ $
I would really appreciate if you guide me to solve this issue.
Thanks,
Rabab
gem5-users mailing list
gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
Hello,
I connected to it using VNC viewer and it showed me the android logo at the beginning and now the screen is black for 3 hours I don't know what is the link.
I followed the steps in android website to download the binary and the I followed gem5 wiki page. I can share the image with you if you want.
Thanks,
Rabab
Sent from my iPhone
On Jul 15, 2016, at 12:44 AM, Sebastian Cai <seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.com> wrote:
You are already in the shell and everything is working correctly. If you want to see the graphical interface, just connect to it using a vnc viewer.
I've been trying to build the image myself, but is seems like I built it incorrectly. Did you follow the instructions on the actual AOSP website, or just the commands from the gem5 website?
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.uk>
Sent: Thursday, July 14, 2016 4:23 PM
To: gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org; m5-users(a)m5sim.orgmailto:m5-users(a)m5sim.org
Subject: [gem5-users] stuck on booting Android kikat
Hello All,
I am trying to boot andoid kitkat image. I started building android kitkat image using this link: http://www.gem5.org/Android_KitKat
Android KitKat - gem5http://www.gem5.org/Android_KitKat
www.gem5.orghttp://www.gem5.org
Building Android KitKat for gem5 Overview. The easiest way to build Android for gem5 is to base the system on a the emulated Goldfish device. The main difference ...
When I run the img with --machine-type=RealView_PBX, I got " Aborted (core dumped) ".
I tried also running without using machine type option with the following command:
./build/ARM/gem5.opt configs/example/fs.py --kernel=/dist/m5/system/binaries/vmlinux --disk-image=/dist/m5/system/disks/android-kitkat_4.4.4_exact.img --cpu-type=atomic --frame-capture -n 1 --caches --l2cache --l1d_size=16kB --l1i_size=16kB --l2_assoc=16 --l2_size=2MB --mem-size=512MB --os-type=android-kitkat --mem-type=LPDDR2_S4_1066_x32
I got the following in the system console and the frame captured is black while
Global frequency set at 1000000000000 ticks per second
info: kernel located at: /dist/m5/system/binaries/vmlinux
Listening for system connection on port 5900
Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80008000
info: Loading DTB file: /dist/m5/system/binaries/vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb at address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: Not doing anything for miscreg ACTLR
warn: Not doing anything for write of miscreg ACTLR
warn: The clidr register always reports 0 caches.
warn: clidr LoUIS field of 0b001 to match current ARM implementations.
warn: The csselr register isn't implemented.
warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
warn: CP14 unimplemented crn[0], opc1[0], crm[7], opc2[0]
warn: Returning zero for read from miscreg pmcr
warn: Ignoring write to miscreg pmcntenclr
warn: Ignoring write to miscreg pmintenclr
warn: Ignoring write to miscreg pmovsr
warn: Ignoring write to miscreg pmcr
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: SCReg: Writing 0x8416740 to dcc0:site1:pos0:fn1:dev5
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
3211459798500: system.terminal: attach terminal 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: instruction 'mcr bpiall' unimplemented
When I make connection with telnet, I got the following:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
Connection closed by foreign host.
othman(a)othman-MacBookPro:~/gem5-stable$ telnet localhost 3456
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
binder: 944:944 transaction failed 29189, size 0-0
random: installd urandom read with 28 bits of entropy available
warning: `rild' uses 32-bit capabilities (legacy support in use)
shell(a)generic:/ $
I would really appreciate if you guide me to solve this issue.
Thanks,
Rabab
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
If you saw the Android logo this is a good sign. Keep waiting -- Android is very complicated and it's not surprising that it takes a while to simulate the boot process.
To try to get some more information you can use m5term to connect to the machine. You should see a shell prompt. If so, you can try running 'dmesg' or 'logcat' to try to get some more information about what is happening in the system.
-----Original Message-----
From: gem5-users [mailto:gem5-users-bounces(a)gem5.org] On Behalf Of Alomairy R.M.
Sent: Friday, July 15, 2016 4:59 AM
To: gem5 users mailing list <gem5-users(a)gem5.org>
Subject: Re: [gem5-users] stuck on booting Android kikat
Hello,
I connected to it using VNC viewer and it showed me the android logo at the beginning and now the screen is black for 3 hours I don't know what is the link.
I followed the steps in android website to download the binary and the I followed gem5 wiki page. I can share the image with you if you want.
Thanks,
Rabab
Sent from my iPhone
On Jul 15, 2016, at 12:44 AM, Sebastian Cai <seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.com> wrote:
You are already in the shell and everything is working correctly. If you want to see the graphical interface, just connect to it using a vnc viewer.
I've been trying to build the image myself, but is seems like I built it incorrectly. Did you follow the instructions on the actual AOSP website, or just the commands from the gem5 website?
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.uk>
Sent: Thursday, July 14, 2016 4:23 PM
To: gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org; m5-users(a)m5sim.orgmailto:m5-users(a)m5sim.org
Subject: [gem5-users] stuck on booting Android kikat
Hello All,
I am trying to boot andoid kitkat image. I started building android kitkat image using this link: http://www.gem5.org/Android_KitKat
Android KitKat - gem5http://www.gem5.org/Android_KitKat
www.gem5.orghttp://www.gem5.org
Building Android KitKat for gem5 Overview. The easiest way to build Android for gem5 is to base the system on a the emulated Goldfish device. The main difference ...
When I run the img with --machine-type=RealView_PBX, I got " Aborted (core dumped) ".
I tried also running without using machine type option with the following command:
./build/ARM/gem5.opt configs/example/fs.py --kernel=/dist/m5/system/binaries/vmlinux --disk-image=/dist/m5/system/disks/android-kitkat_4.4.4_exact.img --cpu-type=atomic --frame-capture -n 1 --caches --l2cache --l1d_size=16kB --l1i_size=16kB --l2_assoc=16 --l2_size=2MB --mem-size=512MB --os-type=android-kitkat --mem-type=LPDDR2_S4_1066_x32
I got the following in the system console and the frame captured is black while Global frequency set at 1000000000000 ticks per second
info: kernel located at: /dist/m5/system/binaries/vmlinux Listening for system connection on port 5900 Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80008000
info: Loading DTB file: /dist/m5/system/binaries/vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb at address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: Not doing anything for miscreg ACTLR
warn: Not doing anything for write of miscreg ACTLR
warn: The clidr register always reports 0 caches.
warn: clidr LoUIS field of 0b001 to match current ARM implementations.
warn: The csselr register isn't implemented.
warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
warn: CP14 unimplemented crn[0], opc1[0], crm[7], opc2[0]
warn: Returning zero for read from miscreg pmcr
warn: Ignoring write to miscreg pmcntenclr
warn: Ignoring write to miscreg pmintenclr
warn: Ignoring write to miscreg pmovsr
warn: Ignoring write to miscreg pmcr
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: SCReg: Writing 0x8416740 to dcc0:site1:pos0:fn1:dev5
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
3211459798500: system.terminal: attach terminal 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: instruction 'mcr bpiall' unimplemented
When I make connection with telnet, I got the following:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016 Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: V2P-CA15 bootconsole [earlycon0] enabled Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem) Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x8045d3f8 - 0x8045d42c Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3 console [ttyAMA0] enabled console [ttyAMA0] enabled bootconsole [earlycon0] disabled bootconsole [earlycon0] disabled PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185 pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref] pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f] pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017] pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f] pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023] pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027] pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] PCI map irq: slot 0, pin 1, devslot 0, irq: 68 PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000) init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit EXT4-fs (sda3): Ignoring removed nomblk_io_submit option EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
Connection closed by foreign host.
othman(a)othman-MacBookPro:~/gem5-stable$ telnet localhost 3456 Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016 Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: V2P-CA15 bootconsole [earlycon0] enabled Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem) Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x8045d3f8 - 0x8045d42c Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3 console [ttyAMA0] enabled console [ttyAMA0] enabled bootconsole [earlycon0] disabled bootconsole [earlycon0] disabled PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185 pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref] pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f] pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017] pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f] pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023] pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027] pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] PCI map irq: slot 0, pin 1, devslot 0, irq: 68 PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000) init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit EXT4-fs (sda3): Ignoring removed nomblk_io_submit option EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
binder: 944:944 transaction failed 29189, size 0-0
random: installd urandom read with 28 bits of entropy available
warning: `rild' uses 32-bit capabilities (legacy support in use) shell(a)generic:/ $
I would really appreciate if you guide me to solve this issue.
Thanks,
Rabab
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
Hello,
Sorry for the late reply, but have you gotten it to work yet?
If its possible, sharing the image file would be great.
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.uk>
Sent: Friday, July 15, 2016 1:58 AM
To: gem5 users mailing list
Subject: Re: [gem5-users] stuck on booting Android kikat
Hello,
I connected to it using VNC viewer and it showed me the android logo at the beginning and now the screen is black for 3 hours I don't know what is the link.
I followed the steps in android website to download the binary and the I followed gem5 wiki page. I can share the image with you if you want.
Thanks,
Rabab
Sent from my iPhone
On Jul 15, 2016, at 12:44 AM, Sebastian Cai <seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.com> wrote:
You are already in the shell and everything is working correctly. If you want to see the graphical interface, just connect to it using a vnc viewer.
I've been trying to build the image myself, but is seems like I built it incorrectly. Did you follow the instructions on the actual AOSP website, or just the commands from the gem5 website?
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.uk>
Sent: Thursday, July 14, 2016 4:23 PM
To: gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org; m5-users(a)m5sim.orgmailto:m5-users(a)m5sim.org
Subject: [gem5-users] stuck on booting Android kikat
Hello All,
I am trying to boot andoid kitkat image. I started building android kitkat image using this link: http://www.gem5.org/Android_KitKat
Android KitKat - gem5http://www.gem5.org/Android_KitKat
www.gem5.orghttp://www.gem5.org
Building Android KitKat for gem5 Overview. The easiest way to build Android for gem5 is to base the system on a the emulated Goldfish device. The main difference ...
When I run the img with --machine-type=RealView_PBX, I got " Aborted (core dumped) ".
I tried also running without using machine type option with the following command:
./build/ARM/gem5.opt configs/example/fs.py --kernel=/dist/m5/system/binaries/vmlinux --disk-image=/dist/m5/system/disks/android-kitkat_4.4.4_exact.img --cpu-type=atomic --frame-capture -n 1 --caches --l2cache --l1d_size=16kB --l1i_size=16kB --l2_assoc=16 --l2_size=2MB --mem-size=512MB --os-type=android-kitkat --mem-type=LPDDR2_S4_1066_x32
I got the following in the system console and the frame captured is black while
Global frequency set at 1000000000000 ticks per second
info: kernel located at: /dist/m5/system/binaries/vmlinux
Listening for system connection on port 5900
Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80008000
info: Loading DTB file: /dist/m5/system/binaries/vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb at address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: Not doing anything for miscreg ACTLR
warn: Not doing anything for write of miscreg ACTLR
warn: The clidr register always reports 0 caches.
warn: clidr LoUIS field of 0b001 to match current ARM implementations.
warn: The csselr register isn't implemented.
warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
warn: CP14 unimplemented crn[0], opc1[0], crm[7], opc2[0]
warn: Returning zero for read from miscreg pmcr
warn: Ignoring write to miscreg pmcntenclr
warn: Ignoring write to miscreg pmintenclr
warn: Ignoring write to miscreg pmovsr
warn: Ignoring write to miscreg pmcr
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: SCReg: Writing 0x8416740 to dcc0:site1:pos0:fn1:dev5
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
3211459798500: system.terminal: attach terminal 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: instruction 'mcr bpiall' unimplemented
When I make connection with telnet, I got the following:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
Connection closed by foreign host.
othman(a)othman-MacBookPro:~/gem5-stable$ telnet localhost 3456
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
binder: 944:944 transaction failed 29189, size 0-0
random: installd urandom read with 28 bits of entropy available
warning: `rild' uses 32-bit capabilities (legacy support in use)
shell(a)generic:/ $
I would really appreciate if you guide me to solve this issue.
Thanks,
Rabab
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
Yes it is booted correctly.
How I can share it with you because the image is 2 GB?
Thanks,
Rabab
Sent from my iPhone
On Jul 18, 2016, at 6:51 PM, Sebastian Cai <seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.com> wrote:
Hello,
Sorry for the late reply, but have you gotten it to work yet?
If its possible, sharing the image file would be great.
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.uk>
Sent: Friday, July 15, 2016 1:58 AM
To: gem5 users mailing list
Subject: Re: [gem5-users] stuck on booting Android kikat
Hello,
I connected to it using VNC viewer and it showed me the android logo at the beginning and now the screen is black for 3 hours I don't know what is the link.
I followed the steps in android website to download the binary and the I followed gem5 wiki page. I can share the image with you if you want.
Thanks,
Rabab
Sent from my iPhone
On Jul 15, 2016, at 12:44 AM, Sebastian Cai <seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.com> wrote:
You are already in the shell and everything is working correctly. If you want to see the graphical interface, just connect to it using a vnc viewer.
I've been trying to build the image myself, but is seems like I built it incorrectly. Did you follow the instructions on the actual AOSP website, or just the commands from the gem5 website?
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.uk>
Sent: Thursday, July 14, 2016 4:23 PM
To: gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org; m5-users(a)m5sim.orgmailto:m5-users(a)m5sim.orgmailto:m5-users(a)m5sim.org
Subject: [gem5-users] stuck on booting Android kikat
Hello All,
I am trying to boot andoid kitkat image. I started building android kitkat image using this link: http://www.gem5.org/Android_KitKat
Android KitKat - gem5http://www.gem5.org/Android_KitKat
www.gem5.orghttp://www.gem5.orghttp://www.gem5.org
Building Android KitKat for gem5 Overview. The easiest way to build Android for gem5 is to base the system on a the emulated Goldfish device. The main difference ...
When I run the img with --machine-type=RealView_PBX, I got " Aborted (core dumped) ".
I tried also running without using machine type option with the following command:
./build/ARM/gem5.opt configs/example/fs.py --kernel=/dist/m5/system/binaries/vmlinux --disk-image=/dist/m5/system/disks/android-kitkat_4.4.4_exact.img --cpu-type=atomic --frame-capture -n 1 --caches --l2cache --l1d_size=16kB --l1i_size=16kB --l2_assoc=16 --l2_size=2MB --mem-size=512MB --os-type=android-kitkat --mem-type=LPDDR2_S4_1066_x32
I got the following in the system console and the frame captured is black while
Global frequency set at 1000000000000 ticks per second
info: kernel located at: /dist/m5/system/binaries/vmlinux
Listening for system connection on port 5900
Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80008000
info: Loading DTB file: /dist/m5/system/binaries/vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb at address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: Not doing anything for miscreg ACTLR
warn: Not doing anything for write of miscreg ACTLR
warn: The clidr register always reports 0 caches.
warn: clidr LoUIS field of 0b001 to match current ARM implementations.
warn: The csselr register isn't implemented.
warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
warn: CP14 unimplemented crn[0], opc1[0], crm[7], opc2[0]
warn: Returning zero for read from miscreg pmcr
warn: Ignoring write to miscreg pmcntenclr
warn: Ignoring write to miscreg pmintenclr
warn: Ignoring write to miscreg pmovsr
warn: Ignoring write to miscreg pmcr
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: SCReg: Writing 0x8416740 to dcc0:site1:pos0:fn1:dev5
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
3211459798500: system.terminal: attach terminal 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: instruction 'mcr bpiall' unimplemented
When I make connection with telnet, I got the following:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
Connection closed by foreign host.
othman(a)othman-MacBookPro:~/gem5-stable$ telnet localhost 3456
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
binder: 944:944 transaction failed 29189, size 0-0
random: installd urandom read with 28 bits of entropy available
warning: `rild' uses 32-bit capabilities (legacy support in use)
shell(a)generic:/ $
I would really appreciate if you guide me to solve this issue.
Thanks,
Rabab
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
Hello,
You could use http://www.filedropper.com/ which can transfer files up to 5GB for free. Thanks so much, I've been trying to build kitkat for a while, but I'm not quite sure where I'm going wrong.
Just curious, what did you fix so that it booted correctly?
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.uk>
Sent: Monday, July 18, 2016 12:40 PM
To: gem5 users mailing list
Subject: Re: [gem5-users] stuck on booting Android kikat
Yes it is booted correctly.
How I can share it with you because the image is 2 GB?
Thanks,
Rabab
Sent from my iPhone
On Jul 18, 2016, at 6:51 PM, Sebastian Cai <seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.com> wrote:
Hello,
Sorry for the late reply, but have you gotten it to work yet?
If its possible, sharing the image file would be great.
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.uk>
Sent: Friday, July 15, 2016 1:58 AM
To: gem5 users mailing list
Subject: Re: [gem5-users] stuck on booting Android kikat
Hello,
I connected to it using VNC viewer and it showed me the android logo at the beginning and now the screen is black for 3 hours I don't know what is the link.
I followed the steps in android website to download the binary and the I followed gem5 wiki page. I can share the image with you if you want.
Thanks,
Rabab
Sent from my iPhone
On Jul 15, 2016, at 12:44 AM, Sebastian Cai <seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.commailto:seb06cai(a)hotmail.com> wrote:
You are already in the shell and everything is working correctly. If you want to see the graphical interface, just connect to it using a vnc viewer.
I've been trying to build the image myself, but is seems like I built it incorrectly. Did you follow the instructions on the actual AOSP website, or just the commands from the gem5 website?
Thanks,
Sebastian
From: gem5-users <gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.orgmailto:gem5-users-bounces(a)gem5.org> on behalf of Alomairy R.M. <rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.ukmailto:rma1c15(a)soton.ac.uk>
Sent: Thursday, July 14, 2016 4:23 PM
To: gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org; m5-users(a)m5sim.orgmailto:m5-users(a)m5sim.orgmailto:m5-users(a)m5sim.org
Subject: [gem5-users] stuck on booting Android kikat
Hello All,
I am trying to boot andoid kitkat image. I started building android kitkat image using this link: http://www.gem5.org/Android_KitKat
Android KitKat - gem5http://www.gem5.org/Android_KitKat
www.gem5.orghttp://www.gem5.orghttp://www.gem5.org
Building Android KitKat for gem5 Overview. The easiest way to build Android for gem5 is to base the system on a the emulated Goldfish device. The main difference ...
When I run the img with --machine-type=RealView_PBX, I got " Aborted (core dumped) ".
I tried also running without using machine type option with the following command:
./build/ARM/gem5.opt configs/example/fs.py --kernel=/dist/m5/system/binaries/vmlinux --disk-image=/dist/m5/system/disks/android-kitkat_4.4.4_exact.img --cpu-type=atomic --frame-capture -n 1 --caches --l2cache --l1d_size=16kB --l1i_size=16kB --l2_assoc=16 --l2_size=2MB --mem-size=512MB --os-type=android-kitkat --mem-type=LPDDR2_S4_1066_x32
I got the following in the system console and the frame captured is black while
Global frequency set at 1000000000000 ticks per second
info: kernel located at: /dist/m5/system/binaries/vmlinux
Listening for system connection on port 5900
Listening for system connection on port 3456
0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
info: Using bootloader at address 0x10
info: Using kernel entry physical address at 0x80008000
info: Loading DTB file: /dist/m5/system/binaries/vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb at address 0x88000000
**** REAL SIMULATION ****
warn: Existing EnergyCtrl, but no enabled DVFSHandler found.
info: Entering event queue @ 0. Starting simulation...
warn: Not doing anything for miscreg ACTLR
warn: Not doing anything for write of miscreg ACTLR
warn: The clidr register always reports 0 caches.
warn: clidr LoUIS field of 0b001 to match current ARM implementations.
warn: The csselr register isn't implemented.
warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
info: trap check M:0 N:0 1:0 2:0 hdcr 0, hcptr 3fff, hstr 0
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
warn: CP14 unimplemented crn[0], opc1[0], crm[7], opc2[0]
warn: Returning zero for read from miscreg pmcr
warn: Ignoring write to miscreg pmcntenclr
warn: Ignoring write to miscreg pmintenclr
warn: Ignoring write to miscreg pmovsr
warn: Ignoring write to miscreg pmcr
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: SCReg: Writing 0x8416740 to dcc0:site1:pos0:fn1:dev5
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
3211459798500: system.terminal: attach terminal 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: instruction 'mcr bpiall' unimplemented
When I make connection with telnet, I got the following:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
Connection closed by foreign host.
othman(a)othman-MacBookPro:~/gem5-stable$ telnet localhost 3456
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
==== m5 slave terminal: Terminal 0 ====
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (othman(a)othman-MacBookPro) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Mon Jul 11 01:31:43 BST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80666d00, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu @9fbe9000 s11712 r8192 d12864 u32768
pcpu-alloc: s11712 r8192 d12864 u32768 alloc=84096
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1 init=/init androidboot.hardware=gem5 qemu=1 qemu.gles=0 android.bootanim=0
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 496340K/524288K available (4591K kernel code, 238K rwdata, 1424K rodata, 287K init, 419K bss, 27948K reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
.text : 0x80008000 - 0x805e7f10 (6016 kB)
.init : 0x805e8000 - 0x8062fdc0 ( 288 kB)
.data : 0x80630000 - 0x8066b9e4 ( 239 kB)
.bss : 0x8066b9e4 - 0x806d4780 ( 420 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 25.16MHz (phys).
sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 2730666655744ns
Switching to timer-based delay loop
Console: colour dummy device 80x30
Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_power 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8045d3f8 - 0x8045d42c
Brought up 1 CPUs
SMP: Total of 1 processors activated.
CPU: All CPU(s) started in SVC mode.
VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/sysctl(a)020000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/aaci(a)040000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/mmci(a)050000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0a0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0b0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/uart(a)0c0000
of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga(a)3,00000000/wdt(a)0f0000
hw-breakpoint: Debug register access (0xee113e93) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee013e90) caused undefined instruction on CPU 0
hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
hw-breakpoint: CPU 0 failed to disable vector catch
Serial: AMBA PL011 UART driver
1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
console [ttyAMA0] enabled
console [ttyAMA0] enabled
bootconsole [earlycon0] disabled
bootconsole [earlycon0] disabled
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
pci 0000:00:01.0: BAR 4: assigned [io 0x2f000000-0x2f00000f]
pci 0000:00:01.0: BAR 0: assigned [io 0x2f000010-0x2f000017]
pci 0000:00:01.0: BAR 2: assigned [io 0x2f000018-0x2f00001f]
pci 0000:00:01.0: BAR 1: assigned [io 0x2f000020-0x2f000023]
pci 0000:00:01.0: BAR 3: assigned [io 0x2f000024-0x2f000027]
pci_bus 0000:00: resource 4 [io 0x0000-0xffffffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
PCI map irq: slot 0, pin 1, devslot 0, irq: 68
PCI map irq: slot 1, pin 2, devslot 1, irq: 69
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 64 bytes, default 64
hw perfevents: enabled with ARMv7_Cortex_A15 PMU driver, 1 counters available
futex hash table entries: 256 (order: 2, 16384 bytes)
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 969
io scheduler noop registered (default)
hdlcd 2b000000.hdlcd: HDLCD: found ARM HDLCD version r0p0
fbcvt: 1920x1080(a)60: CVT Name - 2.073M9-R
hdlcd 2b000000.hdlcd: using 1920x1080-16(a)60 mode
Console: switching to colour frame buffer device 240x67
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.0: version 2.13
PCI: enabling device 0000:00:01.0 (0040 -> 0041)
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x2f000010 ctl 0x2f000020 bmdma 0x2f000000 irq 69
ata2: PATA max UDMA/33 cmd 0x2f000018 ctl 0x2f000024 bmdma 0x2f000008 irq 69
smsc911x: Driver version 2008-10-21
smsc911x 1a000000.ethernet (unregistered net_device): couldn't get clock -2
nxp-isp1760 1b000000.usb: NXP ISP1760 USB Host Controller
nxp-isp1760 1b000000.usb: new USB bus registered, assigned bus number 1
nxp-isp1760 1b000000.usb: Scratch test failed.
nxp-isp1760 1b000000.usb: can't setup: -19
nxp-isp1760 1b000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
rtc-pl031 1c170000.rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000)
ALSA device list:
No soundcards found.
ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
ata1.00: 4194304 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 4194304 512-byte logical blocks: (2.14 GB/2.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI disk
input: AT Raw Set 2 keyboard as /devices/smb.14/motherboard.15/iofpga.17/1c060000.kmi/serio0/input/input0
input: touchkitPS/2 eGalax Touchscreen as /devices/smb.14/motherboard.15/iofpga.17/1c070000.kmi/serio1/input/input2
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:1.
Freeing unused kernel memory: 284K (805e8000 - 8062f000)
init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
init: /dev/hw_random not found
init: cannot open '/initlogo.rle'
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda2
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda2): Ignoring removed nomblk_io_submit option
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: barrier=1,nomblk_io_submit
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
fs_mgr: Running /system/bin/e2fsck on /dev/block/sda3
e2fsck: executing /system/bin/e2fsck failed: No such file or directory
e2fsck: e2fsck terminated by exit(255)
EXT4-fs (sda3): Ignoring removed nomblk_io_submit option
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
EXT4-fs (sda1): re-mounted. Opts: (null)
init: /dev/hw_random not found
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
init: powerctl: cannot expand '${sys.powerctl}'
init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
healthd: No charger supplies found
healthd: BatteryStatusPath not found
healthd: BatteryHealthPath not found
healthd: BatteryPresentPath not found
healthd: BatteryCapacityPath not found
healthd: BatteryVoltagePath not found
healthd: BatteryTemperaturePath not found
healthd: BatteryTechnologyPath not found
binder: 944:944 transaction failed 29189, size 0-0
random: installd urandom read with 28 bits of entropy available
warning: `rild' uses 32-bit capabilities (legacy support in use)
shell(a)generic:/ $
I would really appreciate if you guide me to solve this issue.
Thanks,
Rabab
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.orgmailto:gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
gem5-users mailing list
gem5-users(a)gem5.org
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users